PRODH
Reece Wilson's Gamux Sego Gearbox
This bike check covers Reece Wilson's Gamux Sego Gearbox, a downhill build with 17 parts listed below by slot.
Listed parts include a Manitou Dorado fork, a Manitou Mara shock, a Pinion C1.9 gearbox drivetrain and Hayes Dominion A4 brakes. Tires are Schwalbe Magic Mary up front and Schwalbe Tacky Chan out back.
Part names and setup notes are as recorded in the BuildMTB Archive. Clone the build to start your own from this spec, with compatibility checks on every part you swap.
Reece Wilson's Gamux Sego Gearbox parts list
- Frame
- GamuxSegoSego: alloy with bonded stiffening plates, gearbox
- Fork
- ManitouDoradoDorado: 200mm, inverted
- Shock
- ManitouMaraMara: air, 197mm
- Groupset
- PinionC1.9 gearboxC1.9 gearbox: Gates belt drive, NSB cranks 100-140mm
- Front Wheel
- ReynoldsBlacklabel DHBlacklabel DH: 29", Hope hubs
- Rear Wheel
- ReynoldsBlacklabel DHBlacklabel DH: 27.5", Hope hubs
- Brakes
- HayesDominion A4Dominion A4: 4-piston
- Front Rotor
- Sinter203mm
- Handlebar
- HopeCarbonCarbon: 800mm
- Stem
- North Shore BilletReversed 25mmReversed 25mm: rising plates, -15°
- Headset
- HopeIntegrated
- Seatpost
- HopeRigid
- Saddle
- FizikTerra Argo
- Grips
- RevGripsPro Series
- Pedals
- CrankbrothersMallet DHMallet DH: clipless
- Front Tire
- SchwalbeMagic MaryMagic Mary: 29"×2.5" Ultra Soft
- Rear Tire
- SchwalbeTacky ChanTacky Chan: 27.5"×2.4" Ultra Soft
Make it yours
Load Reece Wilson's Gamux Sego Gearbox into the builder as a new build, then swap parts to fit your riding and budget.