PRODH
Loic Bruni's Specialized Demo Prototype
This bike check covers Loic Bruni's Specialized Demo Prototype, a downhill build with 17 parts listed below by slot.
Listed parts include a Öhlins DH38 m.2 fork, a Öhlins Prototype coil shock, a SRAM AXS DH drivetrain and Brembo 4-piston brakes. Tires are Michelin DH22 up front and Michelin DH34 out back.
Part names and setup notes are as recorded in the BuildMTB Archive. Clone the build to start your own from this spec, with compatibility checks on every part you swap.
Loic Bruni's Specialized Demo Prototype parts list
- Frame
- SpecializedDemoDemo: pre-production prototype, mullet 29"/27.5"
- Fork
- ÖhlinsDH38 m.2DH38 m.2: 200mm, polished alloy crowns
- Shock
- ÖhlinsPrototype coilPrototype coil: unreleased
- Groupset
- SRAMAXS DHAXS DH: 7-speed, hangerless full mount, hidden chainring/idler
- Front Wheel
- DT SwissFR 1500FR 1500: 29"
- Rear Wheel
- DT SwissFR 1500FR 1500: 27.5"
- Brakes
- Brembo4-piston4-piston: mineral oil
- Front Rotor
- Brembo2.3mm DH
- Handlebar
- RenthalFatbar CarbonFatbar Carbon: 800mm
- Stem
- RenthalDirect mountDirect mount: 50mm
- Headset
- SpecializedIntegrated
- Seatpost
- SpecializedRigid
- Saddle
- SpecializedBridge
- Grips
- ODIElite ProElite Pro: lock-on
- Pedals
- HTX2X2: clipless
- Front Tire
- MichelinDH22DH22: 29"×2.4"
- Rear Tire
- MichelinDH34DH34: 27.5"×2.4"
Make it yours
Load Loic Bruni's Specialized Demo Prototype into the builder as a new build, then swap parts to fit your riding and budget.