PRODH
Luca Shaw's Canyon Sender CFR High Pivot
This bike check covers Luca Shaw's Canyon Sender CFR High Pivot, a downhill build with 17 parts listed below by slot.
Listed parts include a RockShox BoXXer Ultimate fork, a RockShox Vivid Coil Ultimate shock, a SRAM X01 DH drivetrain and SRAM Code RSC brakes. Tires are Maxxis High Roller II front and rear.
Part names and setup notes are as recorded in the BuildMTB Archive. Clone the build to start your own from this spec, with compatibility checks on every part you swap.
Luca Shaw's Canyon Sender CFR High Pivot parts list
- Frame
- CanyonSender CFRSender CFR: prototype high pivot, 204mm, KIS
- Fork
- RockShoxBoXXer UltimateBoXXer Ultimate: 200mm, Flight Attendant gravity tune
- Shock
- RockShoxVivid Coil Ultimate
- Groupset
- SRAMX01 DHX01 DH: 7-speed, Quarq AXS transmitter
- Front Wheel
- DT SwissFR 1500FR 1500: 29", 240 hub
- Rear Wheel
- DT SwissFR 1500FR 1500: 27.5", 240 hub
- Brakes
- SRAMCode RSCCode RSC: 4-piston
- Front Rotor
- SRAMHS2 220mm
- Handlebar
- CanyonCP01 CarbonCP01 Carbon: 800mm
- Stem
- CanyonDirect mount
- Headset
- Chris KingInSet DH
- Seatpost
- CanyonRigid
- Saddle
- ErgonSM Downhill
- Grips
- ErgonGD1 Factory
- Pedals
- CrankbrothersMallet DHMallet DH: clipless
- Front Tire
- MaxxisHigh Roller IIHigh Roller II: 29"×2.5" DH
- Rear Tire
- MaxxisHigh Roller IIHigh Roller II: 27.5"×2.4" DH
Make it yours
Load Luca Shaw's Canyon Sender CFR High Pivot into the builder as a new build, then swap parts to fit your riding and budget.