PRODH
Ethan Craik's Scott Gambler 2026
This bike check covers Ethan Craik's Scott Gambler 2026, a downhill build with 17 parts listed below by slot.
Listed parts include a Fox 40 Factory fork, a Fox DHX2 Factory shock, a Shimano Saint drivetrain and Shimano Saint brakes. Tires are Michelin DH22 up front and Michelin DH34 out back.
Part names and setup notes are as recorded in the BuildMTB Archive. Clone the build to start your own from this spec, with compatibility checks on every part you swap.
Ethan Craik's Scott Gambler 2026 parts list
- Frame
- ScottGamblerGambler: 2026, six-bar linkage, internal shock, 210mm
- Fork
- Fox40 Factory40 Factory: GRIP X2, 203mm
- Shock
- FoxDHX2 FactoryDHX2 Factory: coil, in-frame mount
- Groupset
- ShimanoSaintSaint: 7-speed DH
- Front Wheel
- DT SwissFR 1500FR 1500: 29"
- Rear Wheel
- DT SwissFR 1500FR 1500: 27.5"
- Brakes
- ShimanoSaintSaint: 4-piston
- Front Rotor
- ShimanoRT-MT900 203mm
- Handlebar
- SyncrosHixon iC DH CarbonHixon iC DH Carbon: 800mm
- Stem
- SyncrosDirect mount
- Headset
- SyncrosIntegrated
- Seatpost
- SyncrosRigid
- Saddle
- SyncrosBelcarra V
- Grips
- SyncrosPro Lock-On
- Pedals
- ShimanoSaint PD-M821Saint PD-M821: clipless
- Front Tire
- MichelinDH22DH22: 29"×2.4"
- Rear Tire
- MichelinDH34DH34: 27.5"×2.4"
Make it yours
Load Ethan Craik's Scott Gambler 2026 into the builder as a new build, then swap parts to fit your riding and budget.